技術參數

1.出力：200Ton

2.行程：300mm

3.臺面：500*500mm/560*560mm

4.缸徑：355mm

5.馬力：10*2 hp

6.開模形式：上升下降-出入模-2RT/3RT/4RT

7.雙軸電熱：27kw

8.總電力：42kw

9.重量：7000kg

10.機臺尺寸：3000*2400*2000 mm

11.附有一星期預加熱功能

12.加熱方式：電熱管

13.溫度分布：上、下臺面各點溫度誤差在±3℃以內

14.采用日制溫度表：PID補正數字式（日本歐姆龍）

15.主要材質：球墨鑄鐵 (FCD50)

16.壓力開關:壓力傳感器（丹麥）

17.電磁閥:中國臺灣柒洋

18.其它閥類:臺制品

19.PLC:三菱  (日本品牌)

20.觸控屏幕:MCGS中國臺灣

21.動作安全互鎖裝置,防呆設計

22.異常訊息顯示.

23.機器潤滑油更換時間設定.

24.機臺運轉時間累計計時.

25.超越停止保護、停留超時報警

26.壓力保護設計.

27.異常訊息歷史紀錄.

28.觸控屏幕計算機密碼設定

29.機臺故障自動檢索、機臺動作定位自動顯示

機器特點：

1.此機型適合二層或三層模具使用，是多種功能的機型。

2.采用雙動力、雙油泵、雙馬達、雙冷卻器，兩軸完全獨立工作。

3.油路系統特殊設計，無振動，穩定性好，出入模、上升下降比同行機器要快。

4.具有慢速校模功能，校模更準確、更安全。

5.進出模準確定位，有較好的定位安全設計，保模具不損壞。

6.掀合模速度可調，準確可靠。

7.適合電子零部件、醫療用品、生活用品、汽車零部件、工業零部件等產品應用。

Characteristics of the machine:

1.This kind of machine is a machine with multiple functions, it is suitable for two-layer or three-layer mold.

2.Double powers, double oil pumps, double motors and double oil coolers are applied for the two axles to work independently.

3.The oil system is unique in design with good stability, faster lift-up and lift-down speed compared with other brands when unloading/loading mold.

4.With the function of slow speed alignment adjusting, the adjustment is more precise and safe.

5.The accurate placement of the loading/unloading mold has the placement safety design, protecting the mold from being damaged.

6.The speed of mold raising and closing can be adjusted accurately and safely.

7.It is suitable for manufacturers who produce electric components, medical articles, daily necessities, vehicle components and industrial components and etc.