全自動立式橡膠射出成型機
Vertical Type Full Automatic Rubber Injection Molding Machine
適用范圍:200T-600T Scope of application :200T-600T
1.力學設計:機座采用特殊力學設計,平面精度佳,制成品外觀美,品質佳。
2.入料系統:特殊二段式入料設計,能使原料得到0佳排氣效果,又不死料之功能。
3.射出量控制:采用高精密度德制電子尺設計,能準確的控制與計算射出量之大小。
4.冷流道技術:配套模具提供水循環模溫控制機,實現冷流道技術,有效防止死料的產生,減少橡膠原料的損耗。
5.模內真空設計:具有進口真空泵浦,可提供模具內抽真空功能,確保產品品質,提升成品良率。
6.00設計:具有日制高科技紅外線00電眼,并具有全自動防護設置,可清楚掌握機臺狀況,確保00。
7.油路設計:采用全比例式油路系統,低噪音并具有自動調整壓力大小比例之功能,精確穩定。
1.Mechanics design:The base adopts special mechanics design and the precision of the horizon is more accurate . The appearance of the machine is more beautiful as well as the high quality.
2.Material supply system:A special design of two-states material supply is employed . It expels bubble out of the raw material in the most effective way and there is no dead material left in the injection system.
3.Injection volume control:A design incorporating a high precision optical ruler made in Germany is employed . The injection volume can be calculated and controlled precisely.
4.Cold runner technology:Supporting mold is employed to provide water cycle to achieve cold runner technology ,it can avoid dead material effectively to save raw material.
5.Vacuum design of mold :Adopting imported vacuum pump to achieve vacuum supply , it can ensure the quality.
6.Security design :A light curtain made in Japan is available . And an automatic warning system is available . It monitors the status of machine in order to provide extra protection to assure the operation safety for operators .
7.Circuit board design :A full-scale oil system is adopted . The noise is low and the pressure is adjusted automatically and proportionally .It is very accurate and stable.
本系列機械特點 ● 鎖模油缸先鎖模,再由注膠油缸將膠料勻速壓入模腔,制品飛邊少,幾何尺寸精確,物理機械性能均勻穩定. ● 采用原裝進口高壓油泵和中高壓葉片泵組合,比例壓力流量復合閥控制,油路配置先進合理可靠,噪聲小,能耗低. ● 動模板快速上升,慢速鎖緊,快速下降,提高生產效率,保護模具. ● 采用自動進退模及頂出機構,降低勞動強度,避免模具的人為破壞. ● 液壓油缸應用了具有自主知識產權的“油缸復合密封裝置”,密封可靠,壽命長. ● 油箱采用了“翻蓋板結構開放式油箱”,維修維護省時省力,更加人性化. ● 電氣系統采用全電腦控制,操作方便, 具有點動,半自動兩種工作模式,用戶可選用德國西門子或日本三菱進口PLC控制,5.7寸觸摸屏顯示 ● 準備坯料簡單,快捷,生產效率高
上一篇:硫化機廠家